Pre-Stained 4x4x8 Cedar Fence Posts with PostSaver Sleeve - Kiln Dried Six-Sided Chestnut

The Last Fence Posts You'll Ever Install - Revolutionary PostSaver Technology Meets Factory Pre-Staining Tired of replacing rotted fence posts every 5-7 years?

$43.99or 4 × $11.00 with Afterpay

Buy Now Pay Later - Split into 4 payments

SKU: 1000-04•✗ Out of Stock

Pay Later Options

Afterpay

4 × $11.00

Klarna

4 × $11.00

Affirm

4 × $11.00

The Last Fence Posts You'll Ever Install - Revolutionary PostSaver Technology Meets Factory Pre-Staining Tired of replacing rotted fence posts every 5-7 years? Done with the nightmare of digging out failed posts surrounded by concrete? Our PostSaver-equipped pre-stained posts eliminate the #1 cause of fence failure while delivering a professional finish that's impossible to achieve in the field. PostSaver Technology - Revolutionary Ground Contact Protection Each post includes the patented PostSaver sleeve system that creates an impermeable barrier between your cedar post and ground moisture. This technology extends post life from 7-10 years to 20+ years by eliminating the rot zone where 90% of fence failures occur. Six-Sided Factory Stain Penetration Every surface receives our proprietary EXPERT stain application, including the critical end grain areas that absorb the most moisture. Unlike field-applied stain that can't reach buried portions, our factory process ensures complete protection from ground level to post top. Kiln-Dried Structural Stability Our cedar posts are kiln-dried to optimal moisture content (3.5" x 3.5" x 8' actual dimensions) before staining, eliminating the checking, splitting, and warping that plague green lumber. Your fence stays plumb and true for decades. Total Cost of Ownership Advantage 20-Year Investment Analysis: Standard Posts: $15 + replacement every 7 years = $150+ per post (including labor, concrete removal, reinstallation) Gopherwood PostSaver Posts: $43.99 one-time investment Your Savings: 70%+ plus eliminate replacement labor and disruption Installation Excellence No waiting for post-installation staining. No masking existing fence sections. No cleanup of stain overspray on concrete footings. Install today, admire tonight - with a foundation engineered to match the longevity of your premium Gopherwood fence system. Technical Specifications Post Dimensions & Materials Size: 3.5" x 3.5" x 8' (actual dimensions) Wood Species: Premium Kiln Dried Cedar Moisture Content: Kiln-dried to <15% PostSaver Sleeve: Integrated ground contact barrier Stain: EXPERT Chestnut (semi-transparent) Load Rating: Engineered for residential/commercial fencing PostSaver Technology Details Material: Chemically inert barrier sleeve Protection Zone: Critical ground contact area (24" recommended burial) Longevity: Extends post life 2-3x beyond standard treatment Installation: Sleeve remains during installation Warranty: Enhanced protection against ground moisture, 20 year guarantee Stain & Finish Specifications Coverage: Complete six-sided factory application End Grain Sealing: Critical moisture entry points protected UV Protection: Built-in UV blockers throughout Penetration: Deep fiber conditioning and protection Cure Process: Controlled environment for optimal adhesion Custom Color Options Upgrade to Custom EXPERT Colors (+10%) Match your complete fence system with our EXPERT color palette: Transparent Options: Cedar, Clear, Honey, Natural, Redwood Semi-Transparent: Mahogany, Pecan, Sequoia, Walnut Semi-Solid: Auburn, Barnwood, Black, Cape Cod, Chocolate, Eucalyptus, Palomino, Sable, Slate Gray Custom colors require 1-2 weeks production time Installation & Compatibility Post Spacing: Standard 6' to 8' on center Burial Depth: 24" minimum (1/3 above ground rule) Concrete: Compatible with standard post-setting methods Gate Posts: Suitable for gate applications with proper bracing Hardware: Pre-compatible with standard fence hardware Professional Installation Tips: PostSaver sleeve remains in ground for maximum protection Standard post-hole digger compatible No special tools required Compatible with all Gopherwood picket and rail systems Shipping & Availability Chestnut Finish: Ships 1-2 days (always in stock) Custom Colors: 1-2 weeks production Shipping: LTL freight to lower 48 states + local pickup Minimum Order: No minimums - order exact quantities needed Bundling: Available in contractor quantities

gopherwood448

A Premium Stain Lookbook by EXPERT Professional Wood Care The Finish Collection is a professionally produced, printed reference catalog showcasing EXPERT Professional Wood Care stain colors, finishes, and real-world applications. Created for contractors, builders, and wood care professionals, this lookbook features authentic project photography submitted with permission by skilled craftspeople who use EXPERT products every day. Each spread is designed to help communicate finish options clearly, set expectations with clients, and support confident project decisions. This printed catalog is offered as a professional reference piece, with pricing intended to offset production and printing costs. It is ideal for use in client consultations, showrooms, sales presentations, and on-site project planning. Details Full-color, professionally designed print catalog Showcases EXPERT stain colors and finish descriptions Real-world project photography from independent professionals Designed for in-field and client-facing use Important Notes This catalog is provided for professional and educational use Images are featured with permission and do not imply endorsement, partnership, or affiliation Results may vary based on surface preparation, application method, and environmental conditions Reproduction or redistribution of this catalog or its contents is not permitted without written authorization.

$29.99

Wood Stripper Booster: "Butyl Boost" 100% Butyl Cellosolve

●As low as $20/mo

Quick View

Wood Stripper Booster: "Butyl Boost" 100% Butyl Cellosolve

100% Butyl Cellosolve- Boosts Wood Strippers to remove water based stains and paints. Our go to Booster for those tough jobs with water based coatings that a regular stripper won't remove. A PERFECT BOOSTER FOR: Wood Strippers when removing water based stains like Behr, Olympic or Superdeck MIXING INSTRUCTIONS: Add Butyl Boost to your already made wood stripper. Use up to 10% Butyl Boost in your stripper or 1/2 gallon Butyl Booster per five gallon stripper mix. ADDITIONAL INSTRUCTIONS: Strippers must be kept wet or they will not work, a light mist every few minutes will do. Test on a small, inconspicuous area of the wood to ensure proper wood care. Always wet plants, shrubs, and other surrounding vegetation before and after use. Always brighten the wood after using a wood stripper using Stain & Seal Wood Brightener WARNING: Extreme caution should be taken when using strippers. They will burn skin, remove paint from houses, and kill plants, grass and pets. Keep out of reach of children. Exposure to Butyl Cellosolve could cause irritation to the eyes, skin, or lungs. If contact occurs, rinse immediately with water for 15 minutes. If irritation continues, seek immediate medical attention. Do not ingest. Always wear personal protective equipment when using this product. DO NOT MIX WITH OTHER CHEMICALS. PRECAUTIONS: Keep out of reach of children. Do not ingest. Avoid contact with face, eyes, mouth, nose, and skin. Avoid breathing mist. Close container tightly after every use. Do not re-use containers. Danger: Causes eye, skin, and mucous membrane burns. Harmful if swallowed. Harmful if absorbed through skin. Vapor harmful. Wear chemical resistant gloves, boots, goggles, and protective clothing. Wear a NIOSH/MSHA approved respirator and face shield while applying or removing, especially if vapors or mist is generated. Change clothing and wash thoroughly when finished. Avoid contact with bare metal surfaces. Project surfaces are extremely slippery to walk on. DO NOT store in aluminum containers. COMBUSTIBLE: Keep away from heat, sparks open flames, or hot surfaces. DO NOT drink, or smoke when using this product. FIRST AID: IF INHALED: Move to an area with fresh air. In case of breathing difficulties administer oxygen and seek medical attention immediately. IF SWALLOWED: Rinse mouth with water, if person is conscious. DO NOT induce vomiting unless directed by medical personnel. Call Poison Control Center or doctor. IF ON SKIN: Rinse using water. Remove contaminated clothing. Wash skin thoroughly with mild soap and water. If skin irritation persists, seek medical attention. IF IN EYES: Flush eyes thoroughly with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention immediately. For additional information on this product, consult the EXPERT Clean & Bright product data sheet, or safety data sheet. REAL QUALITY. Limited Warranty. warranty TERMS: EXPERT Clean & Bright guarantees the contents of this container to Manufactured by: EXPERT Professional Wood Care,1483 N Mt. Juliet Rd., Suite # 135, Mt. Juliet, TN 37122 ©2022 Expert®™ Stain & Seal is a registered trademark of EXPERT®™ Professional Wood Care. All rights reserved. Application Method REAL APPLICATION. Easy-to-Use & Clean-Up. Read all application instructions prior to using EXPERT®™ Clean & Bright Stripper Booster. Always wear heavy-duty rubber gloves when working with EXPERT Clean & Bright Stripper Booster, or other EXPERT Clean & Bright products. Mix one part Stripper Booster with 3 parts Wood Stripper solution (already mixed). Use a pump sprayer or car wash brush to apply wood stripper product. Lightly dampen (without over-saturating) surfaces to be stripped to avoid excessive grain-rise. Apply a generous, uniform coat of stripper product using a car wash brush or pump sprayer. On vertical surfaces, apply product from the bottom up to avoid streaking. Avoid application in direct sunlight. Allow time for EXPERT Clean & Bright Wood Stripper and Stripper Booster mix to dissolve coating for 10 to 30 minutes. Mist with water if drying occurs. Test readiness by scrubbing a small area. When finish begins to lift from wood surface, agitate if necessary, using a stiff bristled brush in the same direction of wood grain. Use a garden hose at highest pressure, or a pressure washer with 1500-2500 psi to clean surface. Using a pressure washer will reduce the need for scrubbing. Always clean or scrub in the direction of wood grain. If stubborn areas remain, repeat the application in those areas. To neutralize and brighten wood, use EXPERT Clean & Bright’s STEP 3 Wood Brightener immediately, while wood is still wet. Let Wood Brightener sit for 5 to 15 minutes. Any Stripper not neutralized, or thoroughly rinsed will cause poor stain adhesion. After EXPERT’s Wood Brightener is applied, rinse all wood surfaces for 20 to 30 minutes. IMPORTANT: Make sure all soap suds are full rinsed off to avoid any reaction during the wood staining process. Allow wood surface to dry 2 to 4 hours (or longer) before applying EXPERT Stain & Seal wood stains. SDS Download our Safety Data Sheet EXPERT Professional Wood Care products do not and cannot guarantee to kill or eliminate organic growth, mold, mildew, algae, and other microorganisms from the use of our EXPERT 3-Step System. The EXPERT Professional Wood Care products have not been certified by the Environmental Protection Agency

Fan Deck Stain Palette

Wood Stain Color Samples- Fan Decks made of Western Red Cedar. These samples are hand made in our factory with real hand cut and hand stained boards, and highlight our 9 most popular colors. This gives you the most realistic stain sample possible. Be advised- no two boards are alike, expect some variance from board to board on colors. These samples give a great representation of color, however your own fence or deck may take stain differently than sample boards.

$40.00$79.99

●As low as $3/mo

Quick View

Wood Brightener: 100% Oxalic Acid

Our go-to Wood Brightener! We use this to neutralize wood surfaces after cleaning. A must for any wood restoration! PERFECT FOR: Fence Cleaning Deck Cleaning Cedar Siding Pergolas Tongue and Groove Any wood restoration BENEFITS & USES: Brings back the original color of the wood Neutralizes and brightens wood after any alkaline chemical wash Restores proper pH in wood and opens wood grain to accept more stain 100% Oxalic Acid Wood Brightener ADDITIONAL INSTRUCTIONS: Always wet plants, shrubs, and other vegetation before and after use. Test on a small, inconspicuous area of the wood to ensure proper wood care. Read and understand MSDS for this product prior to use. WARNING: Keep out of reach of children. Exposure to oxalic acid could cause irritation to the eyes, skin, or lungs. If contact occurs, rinse immediately with water for 15 minutes. If irritation continues, seek immediate medical attention. Do not ingest. Always wear personal protective equipment when using this product. DO NOT MIX WITH OTHER CHEMICALS. Coverage Rates Coverage: Add 4oz to 8oz of EXPERT’s Brightener added to one (1) gallon of water, each gallon covers 100 to 200 sq. ft. of surface area. Application Method REAL PERFORMANCE. Use & Preparation. EXPERT’s Wood Brightener is STEP 2 of our 3-STEP system. Intended for use on all types of weathered wood, including decks, fences, siding, log homes, patio furniture and other exterior wood. EXPERT’s Wood Brightener is ideal for surface prep prior to stain application. Product can be used solely as a cleaner and brightener, or as a neutralizer to further brighten woods that have been previously cleaned or stripped. TEST AREA: It’s recommended to test this product in a small, inconspicuous area to ensure desired results before use. Raised grain can occur as wood pores are opened during the cleaning process. LIMITATIONS: EXPERT Clean & Bright Wood Brightener cannot remove intact paint, stain, or clear finishes, and may dull painted or metal surfaces if not rinsed immediately. Always store in a temperature-controlled room, kept from freezing, and can be stored for up to 36 months, unopened. REAL APPLICATION. Easy-to-Use & Clean-Up. Read through all the step-by-step instructions prior to using EXPERT®™ Clean & Bright Wood Brightener. MIXING: Always wear heavy-duty rubber gloves, niosh approved respirator and PPE when working with EXPERT Clean & Bright Wood Brightener, or any other EXPERT Clean & Bright products. Mix 4oz to 8oz of Wood Brightener with each gallon of warm water and stir thoroughly until powder is mostly dissolved. Mix in a separate 5-gallon pail before transferring into a pump sprayer. This avoids clogging the sprayer. Use Brightener solution within 24 hours of mixing. Wood Brightener mixed solution is colorless for ease of identification. APPLICATION: Thoroughly wet the treatment surface, and all surrounding areas, including plants and shrubs with water before application. Apply EXPERT Clean & Bright Wood Brightener solution using either the sprayer, or a brush, a car wash brush, or mop. Scrubbing is not needed after using EXPERT’s Cleaner or Stripper. Let the Brightener solution sit for 5 to 15 minutes, keeping it wet with additional solution until an obvious color change has occurred. If applying Brightener on vertical surfaces, begin at the bottom, working upwards. Repeat application, if needed. RINSE: Rinse surfaces and surrounding areas thoroughly for 20 to 30 minutes with water from a hose or pressure washer using lowest pressure. Rinse wood and surrounding surfaces thoroughly, never let solution dry on windows, siding, metal and other surfaces or residue may be visible. Allow wood surfaces to dry 48 to 72 hours (or longer) before applying EXPERT Stain & Seal wood stains. Stains must be applied when wood is dried to 13% moisture content or less. SDS Download our Safety Data Sheet EXPERT Professional Wood Care products do not and cannot guarantee to kill or eliminate organic growth, mold, mildew, algae, and other microorganisms from the use of our EXPERT 3-Step System. The EXPERT Professional Wood Care products have not been certified by the Environmental Protection Agency

$12.99 – $269.99

Pre-Stained 4x4x8 Cedar Fence Posts with PostSaver Sleeve - Kiln Dried Six-Sided Chestnut

You May Also Like

The Finish Collection

Wood Stripper Booster: "Butyl Boost" 100% Butyl Cellosolve

Fan Deck Stain Palette

Wood Brightener: 100% Oxalic Acid

Pre-Stained 4x4x8 Cedar Fence Posts with PostSaver Sleeve - Kiln Dried Six-Sided Chestnut

You May Also Like

The Finish Collection

Wood Stripper Booster: "Butyl Boost" 100% Butyl Cellosolve

Fan Deck Stain Palette

Wood Brightener: 100% Oxalic Acid