Clear Fence & Deck Stain - Revolutionary Oil-Based Formula | Natural Weathering - 4oz Sample Can

4oz Sample Can — Clear

PAY LATER AVAILABLE

Clear Fence & Deck Stain - Revolutionary Oil-Based Formula | Natural Weathering

Revolutionary True Oil-Based Wood Stain Low VOC • 50-State Compliant • Zero Performance Compromise Revolutionary Formula - True Oil Performance • Low VOC • Al

$14.99or 4 × $3.75 with Afterpay

Buy Now Pay Later - Split into 4 payments

Color: 4oz Sample Can

Fence Color Preview

Showing 4oz Sample Can

4oz Sample Can

Color representation is approximate. Actual results may vary based on wood type and application.

SKU: 701-01-100•✓ In Stock

Pay Later Options

Afterpay

4 × $3.75

Klarna

4 × $3.75

Affirm

4 × $3.75

Revolutionary True Oil-Based Wood Stain Low VOC • 50-State Compliant • Zero Performance Compromise Revolutionary Formula - True Oil Performance • Low VOC • All 50 States Legal Perfect Applications - Fences • Decks • Pergolas • Gazebos • Siding • Log Homes Revolutionary Breakthrough Technology For decades, contractors and homeowners faced an impossible choice: Traditional Oil-Based Stains: Superior penetration and durability BUT... Terrible chemical odors during application High VOCs (banned in California & other states) Higher VOC content than low VOC alternatives Strong chemical smell during and after application Water-Based Alternatives: Low odor and VOC compliant BUT... Poor penetration - sits on surface Film-forming formula peels and flakes Requires frequent reapplication Inferior UV protection and durability EXPERT'S Revolutionary Breakthrough: TRUE OIL-BASED PERFORMANCE + LOW VOC Deep Penetration: True oil formula penetrates like traditional oil stains. 50-State Compliant: Low-VOC Zero Compromise: Full oil-based durability and protection Lower VOC Formula: Low VOC rating compared to traditional oil stains Competitive Comparison: Critical Feature EXPERT Professional Traditional Oil-Based Stains Water-Based Stains No Application Odor ✅ Low Odor ❌ Strong Chemical Smell ✅ Low Odor True Oil Performance ✅ Deep Penetrating Oil ✅ Oil-Based ❌ Surface Film Only 50-State VOC Compliance ✅ Low VOC ❌ High VOC Restrictions ✅ Compliant No Streaks/Lap Marks ✅ Self-Leveling Formula ⚠️ Application Dependent ⚠️ Requires Perfect Technique Environmental Rating ✅ Low VOC ❌ Traditional VOC Levels ✅ Low VOC Product Specifications & Options Clear Oil Formula - Perfect for Premium Wood Species EXPERT Clear Oil wood stain and sealer is expertly formulated for Western Red Cedar, Pressure Treated Pine, Redwood, Poplar, Oak, and other premium wood species. The clear oil formula highlights your wood's natural beauty while covering slight imperfections - giving you that perfect balance of protection and aesthetics. Advanced Formula Technology: Non-Drying Oils & Conditioners: Penetrate deep to nurture wood from inside out High Solids Content: Maximum protection and longevity in every coat Proprietary Barrier Formula: Prevents warpage, cracking, and twisting for years Non-Filming Technology: Never streaks, runs, or leaves lap marks No Temperature Restrictions - Apply EXPERT Stain & Seal in any weather condition, hot or cold. Work year-round without temperature delays. Direct Sun or Shade Application - EXPERT can be applied in direct sunlight or shade without affecting performance. Maximum scheduling flexibility for contractors. Linseed Oil Free Formula - Low spontaneous combustion risk. EXPERT contains no linseed oil, reducing fire hazards during storage and disposal. Safer for crews and job sites. Lifetime Warranty Protection - When you follow the proven EXPERT 3-Step System, your project is backed by a lifetime warranty. Professional confidence, guaranteed results. Natural Weathering Benefit: Clear stains allow the wood to develop its natural gray patina over time, creating that sought-after weathered look while maintaining structural protection underneath. Coverage Rates & Sizing Options 1 Gallon Container - $64.99 Rough Cut Lumber: 125-150 square feet Smooth Cut Lumber: 175-200 square feet Weight: 8 lbs Ideal for: Small decks, fence sections, touch-ups 5 Gallon Container - $249.99 Rough Cut Lumber: 625-750 square feet Smooth Cut Lumber: 875-1000 square feet Weight: 40 lbs Ideal for: Large projects, whole fences, commercial jobs Application Instructions Surface Preparation: Clean thoroughly: Use EXPERT Wood Cleaner & Wood Brightenerto remove dirt, stains from organic growth, and worn oil-based stains Allow complete drying: Ensure moisture content below 13% (use moisture meter) Check weather: Apply when no rain expected for 48 hours Application Process: Mix thoroughly: Stir well before use, continue stirring during application DO NOT THIN: Use product as-is for optimal performance Apply generously: One heavy coat, fully saturating wood surface Multiple application methods: Brush, roller, stain mitt, pad, or sprayer Prevent pooling: Remove excess stain from flat surfaces after 30-60 minutes Back-brush horizontal surfaces: Ensures even penetration and finish Drying & Curing: No foot traffic: 24 hours minimum Light traffic: After 72 hours Full cure: Several weeks for true final color Deep penetration: Oils continue conditioning wood for days Perfect Applications - Versatile & Reliable Residential Projects: Wood fences (all heights and styles) Decks and deck railings Pergolas and gazebos Cedar siding and shakes Outdoor furniture and planters Commercial Applications: Restaurant patios and outdoor seating Commercial fencing and barriers Resort and hotel exteriors Park benches and structures Multi-unit housing projects Specialty Projects: Log homes and cabins Historic restoration projects Vertical wood siding Previously stained surfaces (oil-based compatible) New and aged wood surfaces Expert Support & Environmental Advantage Low VOC Advantage: EXPERT's low VOC formula significantly reduces VOC content compared to traditional oil-based stains. This lower VOC formulation provides several advantages: Regulatory Compliance: Meets strict state environmental standards including California Reduced Chemical Odor: Minimal odor during application compared to higher VOC oil stains EXPERT's positioning: Low VOC rating allows contractors and homeowners to choose true oil-based performance while meeting environmental regulations that restrict many traditional oil-based stains. 50-State Legal Guarantee: Compliant with the strictest environmental regulations nationwide, including California's tough VOC standards. Free Professional Consultation Call (615) 785-1861 to speak with our wood care experts: Project-specific application guidance Color selection and matching advice Coverage calculations and material estimates Troubleshooting and problem resolution Maintenance schedules and reapplication timing Hours: Monday-Friday 7AM-7PM CT | Expert advice always included with purchase Educational Resources: Stain & Seal University: Private Facebook Group, YouTube tutorials, and guides Technical Data Sheets: Complete specifications and testing data Safety Data Sheets: Full health and safety information Application Videos: Step-by-step visual instructions Technical Specifications and Guarantee Pallet Specifications for Large Orders: Container Size 1 Gallon Pail 5 Gallon Pail Pails per Pallet 120 units 48 units Individual Weight 8 lbs 40 lbs Pallet Dimensions 42" W × 48" D × 54" H 42" W × 48" D × 66" H Customer Success & Satisfaction Guaranteed Trusted by thousands of homeowners and contractors nationwide who demand professional results without compromise. Your Satisfaction Guaranteed EXPERT Stain & Seal is made by experts for experts - and the homeowners who demand and expect real results. Lifetime Warranty Protection - When you follow the proven EXPERT 3-Step System, your project is backed by our lifetime warranty. Professional confidence, guaranteed results. Ready to Experience the EXPERT Difference? Questions before you order? Call the experts: (615) 785-1861 Monday-Friday 7AM-7PM CT | Professional consultation always included Data Sheets SDS Download our Safety Data Sheet TDS Download our Technical Data Sheet

contractorDiscount
productCalc
productGallery
restricted-ca
ship_seperate

A Premium Stain Lookbook by EXPERT Professional Wood Care The Finish Collection is a professionally produced, printed reference catalog showcasing EXPERT Professional Wood Care stain colors, finishes, and real-world applications. Created for contractors, builders, and wood care professionals, this lookbook features authentic project photography submitted with permission by skilled craftspeople who use EXPERT products every day. Each spread is designed to help communicate finish options clearly, set expectations with clients, and support confident project decisions. This printed catalog is offered as a professional reference piece, with pricing intended to offset production and printing costs. It is ideal for use in client consultations, showrooms, sales presentations, and on-site project planning. Details Full-color, professionally designed print catalog Showcases EXPERT stain colors and finish descriptions Real-world project photography from independent professionals Designed for in-field and client-facing use Important Notes This catalog is provided for professional and educational use Images are featured with permission and do not imply endorsement, partnership, or affiliation Results may vary based on surface preparation, application method, and environmental conditions Reproduction or redistribution of this catalog or its contents is not permitted without written authorization.

$29.99

Wood Stripper Booster: "Butyl Boost" 100% Butyl Cellosolve

●As low as $20/mo

Quick View

Wood Stripper Booster: "Butyl Boost" 100% Butyl Cellosolve

100% Butyl Cellosolve- Boosts Wood Strippers to remove water based stains and paints. Our go to Booster for those tough jobs with water based coatings that a regular stripper won't remove. A PERFECT BOOSTER FOR: Wood Strippers when removing water based stains like Behr, Olympic or Superdeck MIXING INSTRUCTIONS: Add Butyl Boost to your already made wood stripper. Use up to 10% Butyl Boost in your stripper or 1/2 gallon Butyl Booster per five gallon stripper mix. ADDITIONAL INSTRUCTIONS: Strippers must be kept wet or they will not work, a light mist every few minutes will do. Test on a small, inconspicuous area of the wood to ensure proper wood care. Always wet plants, shrubs, and other surrounding vegetation before and after use. Always brighten the wood after using a wood stripper using Stain & Seal Wood Brightener WARNING: Extreme caution should be taken when using strippers. They will burn skin, remove paint from houses, and kill plants, grass and pets. Keep out of reach of children. Exposure to Butyl Cellosolve could cause irritation to the eyes, skin, or lungs. If contact occurs, rinse immediately with water for 15 minutes. If irritation continues, seek immediate medical attention. Do not ingest. Always wear personal protective equipment when using this product. DO NOT MIX WITH OTHER CHEMICALS. PRECAUTIONS: Keep out of reach of children. Do not ingest. Avoid contact with face, eyes, mouth, nose, and skin. Avoid breathing mist. Close container tightly after every use. Do not re-use containers. Danger: Causes eye, skin, and mucous membrane burns. Harmful if swallowed. Harmful if absorbed through skin. Vapor harmful. Wear chemical resistant gloves, boots, goggles, and protective clothing. Wear a NIOSH/MSHA approved respirator and face shield while applying or removing, especially if vapors or mist is generated. Change clothing and wash thoroughly when finished. Avoid contact with bare metal surfaces. Project surfaces are extremely slippery to walk on. DO NOT store in aluminum containers. COMBUSTIBLE: Keep away from heat, sparks open flames, or hot surfaces. DO NOT drink, or smoke when using this product. FIRST AID: IF INHALED: Move to an area with fresh air. In case of breathing difficulties administer oxygen and seek medical attention immediately. IF SWALLOWED: Rinse mouth with water, if person is conscious. DO NOT induce vomiting unless directed by medical personnel. Call Poison Control Center or doctor. IF ON SKIN: Rinse using water. Remove contaminated clothing. Wash skin thoroughly with mild soap and water. If skin irritation persists, seek medical attention. IF IN EYES: Flush eyes thoroughly with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention immediately. For additional information on this product, consult the EXPERT Clean & Bright product data sheet, or safety data sheet. REAL QUALITY. Limited Warranty. warranty TERMS: EXPERT Clean & Bright guarantees the contents of this container to Manufactured by: EXPERT Professional Wood Care,1483 N Mt. Juliet Rd., Suite # 135, Mt. Juliet, TN 37122 ©2022 Expert®™ Stain & Seal is a registered trademark of EXPERT®™ Professional Wood Care. All rights reserved. Application Method REAL APPLICATION. Easy-to-Use & Clean-Up. Read all application instructions prior to using EXPERT®™ Clean & Bright Stripper Booster. Always wear heavy-duty rubber gloves when working with EXPERT Clean & Bright Stripper Booster, or other EXPERT Clean & Bright products. Mix one part Stripper Booster with 3 parts Wood Stripper solution (already mixed). Use a pump sprayer or car wash brush to apply wood stripper product. Lightly dampen (without over-saturating) surfaces to be stripped to avoid excessive grain-rise. Apply a generous, uniform coat of stripper product using a car wash brush or pump sprayer. On vertical surfaces, apply product from the bottom up to avoid streaking. Avoid application in direct sunlight. Allow time for EXPERT Clean & Bright Wood Stripper and Stripper Booster mix to dissolve coating for 10 to 30 minutes. Mist with water if drying occurs. Test readiness by scrubbing a small area. When finish begins to lift from wood surface, agitate if necessary, using a stiff bristled brush in the same direction of wood grain. Use a garden hose at highest pressure, or a pressure washer with 1500-2500 psi to clean surface. Using a pressure washer will reduce the need for scrubbing. Always clean or scrub in the direction of wood grain. If stubborn areas remain, repeat the application in those areas. To neutralize and brighten wood, use EXPERT Clean & Bright’s STEP 3 Wood Brightener immediately, while wood is still wet. Let Wood Brightener sit for 5 to 15 minutes. Any Stripper not neutralized, or thoroughly rinsed will cause poor stain adhesion. After EXPERT’s Wood Brightener is applied, rinse all wood surfaces for 20 to 30 minutes. IMPORTANT: Make sure all soap suds are full rinsed off to avoid any reaction during the wood staining process. Allow wood surface to dry 2 to 4 hours (or longer) before applying EXPERT Stain & Seal wood stains. SDS Download our Safety Data Sheet EXPERT Professional Wood Care products do not and cannot guarantee to kill or eliminate organic growth, mold, mildew, algae, and other microorganisms from the use of our EXPERT 3-Step System. The EXPERT Professional Wood Care products have not been certified by the Environmental Protection Agency

Fan Deck Stain Palette

Wood Stain Color Samples- Fan Decks made of Western Red Cedar. These samples are hand made in our factory with real hand cut and hand stained boards, and highlight our 9 most popular colors. This gives you the most realistic stain sample possible. Be advised- no two boards are alike, expect some variance from board to board on colors. These samples give a great representation of color, however your own fence or deck may take stain differently than sample boards.

$40.00$79.99

●As low as $3/mo

Quick View

Wood Brightener: 100% Oxalic Acid

Our go-to Wood Brightener! We use this to neutralize wood surfaces after cleaning. A must for any wood restoration! PERFECT FOR: Fence Cleaning Deck Cleaning Cedar Siding Pergolas Tongue and Groove Any wood restoration BENEFITS & USES: Brings back the original color of the wood Neutralizes and brightens wood after any alkaline chemical wash Restores proper pH in wood and opens wood grain to accept more stain 100% Oxalic Acid Wood Brightener ADDITIONAL INSTRUCTIONS: Always wet plants, shrubs, and other vegetation before and after use. Test on a small, inconspicuous area of the wood to ensure proper wood care. Read and understand MSDS for this product prior to use. WARNING: Keep out of reach of children. Exposure to oxalic acid could cause irritation to the eyes, skin, or lungs. If contact occurs, rinse immediately with water for 15 minutes. If irritation continues, seek immediate medical attention. Do not ingest. Always wear personal protective equipment when using this product. DO NOT MIX WITH OTHER CHEMICALS. Coverage Rates Coverage: Add 4oz to 8oz of EXPERT’s Brightener added to one (1) gallon of water, each gallon covers 100 to 200 sq. ft. of surface area. Application Method REAL PERFORMANCE. Use & Preparation. EXPERT’s Wood Brightener is STEP 2 of our 3-STEP system. Intended for use on all types of weathered wood, including decks, fences, siding, log homes, patio furniture and other exterior wood. EXPERT’s Wood Brightener is ideal for surface prep prior to stain application. Product can be used solely as a cleaner and brightener, or as a neutralizer to further brighten woods that have been previously cleaned or stripped. TEST AREA: It’s recommended to test this product in a small, inconspicuous area to ensure desired results before use. Raised grain can occur as wood pores are opened during the cleaning process. LIMITATIONS: EXPERT Clean & Bright Wood Brightener cannot remove intact paint, stain, or clear finishes, and may dull painted or metal surfaces if not rinsed immediately. Always store in a temperature-controlled room, kept from freezing, and can be stored for up to 36 months, unopened. REAL APPLICATION. Easy-to-Use & Clean-Up. Read through all the step-by-step instructions prior to using EXPERT®™ Clean & Bright Wood Brightener. MIXING: Always wear heavy-duty rubber gloves, niosh approved respirator and PPE when working with EXPERT Clean & Bright Wood Brightener, or any other EXPERT Clean & Bright products. Mix 4oz to 8oz of Wood Brightener with each gallon of warm water and stir thoroughly until powder is mostly dissolved. Mix in a separate 5-gallon pail before transferring into a pump sprayer. This avoids clogging the sprayer. Use Brightener solution within 24 hours of mixing. Wood Brightener mixed solution is colorless for ease of identification. APPLICATION: Thoroughly wet the treatment surface, and all surrounding areas, including plants and shrubs with water before application. Apply EXPERT Clean & Bright Wood Brightener solution using either the sprayer, or a brush, a car wash brush, or mop. Scrubbing is not needed after using EXPERT’s Cleaner or Stripper. Let the Brightener solution sit for 5 to 15 minutes, keeping it wet with additional solution until an obvious color change has occurred. If applying Brightener on vertical surfaces, begin at the bottom, working upwards. Repeat application, if needed. RINSE: Rinse surfaces and surrounding areas thoroughly for 20 to 30 minutes with water from a hose or pressure washer using lowest pressure. Rinse wood and surrounding surfaces thoroughly, never let solution dry on windows, siding, metal and other surfaces or residue may be visible. Allow wood surfaces to dry 48 to 72 hours (or longer) before applying EXPERT Stain & Seal wood stains. Stains must be applied when wood is dried to 13% moisture content or less. SDS Download our Safety Data Sheet EXPERT Professional Wood Care products do not and cannot guarantee to kill or eliminate organic growth, mold, mildew, algae, and other microorganisms from the use of our EXPERT 3-Step System. The EXPERT Professional Wood Care products have not been certified by the Environmental Protection Agency

$12.99 – $269.99

Clear Fence & Deck Stain - Revolutionary Oil-Based Formula | Natural Weathering

Fence Color Preview

You May Also Like

The Finish Collection

Wood Stripper Booster: "Butyl Boost" 100% Butyl Cellosolve

Fan Deck Stain Palette

Wood Brightener: 100% Oxalic Acid

Clear Fence & Deck Stain - Revolutionary Oil-Based Formula | Natural Weathering

Fence Color Preview

You May Also Like

The Finish Collection

Wood Stripper Booster: "Butyl Boost" 100% Butyl Cellosolve

Fan Deck Stain Palette

Wood Brightener: 100% Oxalic Acid