Pre-Stained Cedar Tongue & Groove Fence Planks ⅞" x 6" x 6' - Fence Trac System Compatible

The Only Pre-Stained Tongue & Groove Planks Engineered for Modern Aluminum Fence Systems Frustrated with generic tongue & groove that doesn't fit alumin

$15.99or 4 × $4.00 with Afterpay

Buy Now Pay Later - Split into 4 payments

SKU: 1000-06•✗ Out of Stock

Pay Later Options

Afterpay

4 × $4.00

Klarna

4 × $4.00

Affirm

4 × $4.00

The Only Pre-Stained Tongue & Groove Planks Engineered for Modern Aluminum Fence Systems Frustrated with generic tongue & groove that doesn't fit aluminum fence pocket rails properly? Tired of mismatched rough/smooth sides creating an unprofessional appearance? Our specialized ⅞" cedar planks are precision-engineered for Fence Trac and compatible aluminum/steel systems, delivering the warmth of wood with the durability of modern fencing technology. Fence Trac System Compatibility - Perfect Fit Guarantee Engineered specifically for Fence Trac's ⅞" pocket rail system, these planks also work seamlessly with other aluminum and steel fencing brands that accommodate ⅞" thick infill materials. No force-fitting, no gaps, no compromises - just precision-engineered compatibility. Dual Rough-Sawn Finish - Uniform Professional Appearance Unlike standard tongue & groove lumber with one rough and one smooth side, our planks feature a consistent rough-sawn texture on both faces. This eliminates the guesswork of orientation and ensures a uniform, professional appearance whether installed horizontally or vertically. True 7/8" Thickness - No Dimensional Surprises While standard ⅞" lumber often measures closer to ¾", our planks are milled to true ⅞" thickness for guaranteed fit in aluminum fence pocket rails. No forcing, no binding, no installation headaches. Installation Versatility Vertical Installation: Traditional privacy fence appearance Horizontal Installation: Contemporary board-and-batten look Mixed Orientation: Custom design flexibility Seamless Integration: Tongue & groove eliminates gaps and ensures weather-tight fit Six-Sided Factory Stain Protection Every plank receives complete EXPERT stain saturation on all surfaces, including tongue and groove edges that are impossible to reach after installation. Your aluminum or steel framed fence gets the warmth of natural cedar with superior initial protection and extended maintenance intervals. Technical Specifications Plank Dimensions & Materials Size: True ⅞" x 5-1/16" x 6' (actual dimensions) Wood Species: Premium Western Red Cedar Moisture Content: Kiln-dried to <15% Surface Finish: Rough-sawn texture both sides Edge Profile: Precision tongue & groove Stain: EXPERT Chestnut (semi-transparent) System Compatibility Details Primary System: Fence Trac ⅞" pocket rail Compatible Systems: Any aluminum/steel fence with ⅞" infill capacity Installation Methods: Horizontal or vertical orientation Fastening: Hidden attachment through pocket rail system Weather Sealing: Tongue & groove creates tight weather barrier Cedar & Stain Specifications Wood Grade: Premium Western Red Cedar Natural Properties: Rot resistant, insect resistant, dimensionally stable Factory Stain: Complete six-sided EXPERT penetration UV Protection: Built-in fade resistance Maintenance: Minimal - factory finish eliminates field staining Aluminum Fence Integration Advantages Professional Hybrid Fencing Solution Combine the strength and low-maintenance benefits of aluminum framing with the natural beauty and privacy of pre-finished cedar. Perfect for: Residential Privacy: Aluminum structure with wood privacy infill Commercial Applications: Durable framework with attractive wood accent Pool Fencing: Code-compliant aluminum with cedar aesthetic enhancement Property Boundaries: Strong perimeter with natural appearance Installation Efficiency Benefits No Field Staining: Planks arrive ready for immediate installation Perfect Fit: Engineered dimensions eliminate modification Weather Independence: Install regardless of staining weather conditions Clean Process: No stain overspray on aluminum framework Custom Color Options Upgrade to Custom EXPERT Colors (+10%) Coordinate with your overall fence design using our complete EXPERT color palette: Transparent Options: Cedar, Clear, Honey, Natural, Redwood Semi-Transparent: Mahogany, Pecan, Sequoia, Walnut Semi-Solid: Auburn, Barnwood, Black, Cape Cod, Chocolate, Eucalyptus, Palomino, Sable, Slate Gray Custom colors require 1-2 weeks production time Design Applications & Compatibility Fence Systems: Fence Trac, aluminum pocket rail systems, steel frame systems Installation Patterns: Solid privacy, spaced semi-privacy, accent panels Architectural Styles: Modern, traditional, transitional, commercial Coverage: Approximately 3 sq ft per plank (6" x 6') Quantity Calculation Guide For Standard 6' High Aluminum Fence Section: Solid Privacy Fill: 14 planks per 6' wide section Partial Privacy: 8-10 planks per section (depending on spacing) Accent Panels: 4-6 planks for decorative sections Shipping & Availability Chestnut Finish: Ships 1-2 days (always in stock) Custom Colors: 1-2 weeks production Shipping: LTL freight to lower 48 states + local pickup Minimum Order: No minimums - order exact quantities needed System Integration: Compatible with all Gopherwood stain colors for complete fence coordination

gopherwood7866

A Premium Stain Lookbook by EXPERT Professional Wood Care The Finish Collection is a professionally produced, printed reference catalog showcasing EXPERT Professional Wood Care stain colors, finishes, and real-world applications. Created for contractors, builders, and wood care professionals, this lookbook features authentic project photography submitted with permission by skilled craftspeople who use EXPERT products every day. Each spread is designed to help communicate finish options clearly, set expectations with clients, and support confident project decisions. This printed catalog is offered as a professional reference piece, with pricing intended to offset production and printing costs. It is ideal for use in client consultations, showrooms, sales presentations, and on-site project planning. Details Full-color, professionally designed print catalog Showcases EXPERT stain colors and finish descriptions Real-world project photography from independent professionals Designed for in-field and client-facing use Important Notes This catalog is provided for professional and educational use Images are featured with permission and do not imply endorsement, partnership, or affiliation Results may vary based on surface preparation, application method, and environmental conditions Reproduction or redistribution of this catalog or its contents is not permitted without written authorization.

$29.99

Wood Stripper Booster: "Butyl Boost" 100% Butyl Cellosolve

●As low as $20/mo

Quick View

Wood Stripper Booster: "Butyl Boost" 100% Butyl Cellosolve

100% Butyl Cellosolve- Boosts Wood Strippers to remove water based stains and paints. Our go to Booster for those tough jobs with water based coatings that a regular stripper won't remove. A PERFECT BOOSTER FOR: Wood Strippers when removing water based stains like Behr, Olympic or Superdeck MIXING INSTRUCTIONS: Add Butyl Boost to your already made wood stripper. Use up to 10% Butyl Boost in your stripper or 1/2 gallon Butyl Booster per five gallon stripper mix. ADDITIONAL INSTRUCTIONS: Strippers must be kept wet or they will not work, a light mist every few minutes will do. Test on a small, inconspicuous area of the wood to ensure proper wood care. Always wet plants, shrubs, and other surrounding vegetation before and after use. Always brighten the wood after using a wood stripper using Stain & Seal Wood Brightener WARNING: Extreme caution should be taken when using strippers. They will burn skin, remove paint from houses, and kill plants, grass and pets. Keep out of reach of children. Exposure to Butyl Cellosolve could cause irritation to the eyes, skin, or lungs. If contact occurs, rinse immediately with water for 15 minutes. If irritation continues, seek immediate medical attention. Do not ingest. Always wear personal protective equipment when using this product. DO NOT MIX WITH OTHER CHEMICALS. PRECAUTIONS: Keep out of reach of children. Do not ingest. Avoid contact with face, eyes, mouth, nose, and skin. Avoid breathing mist. Close container tightly after every use. Do not re-use containers. Danger: Causes eye, skin, and mucous membrane burns. Harmful if swallowed. Harmful if absorbed through skin. Vapor harmful. Wear chemical resistant gloves, boots, goggles, and protective clothing. Wear a NIOSH/MSHA approved respirator and face shield while applying or removing, especially if vapors or mist is generated. Change clothing and wash thoroughly when finished. Avoid contact with bare metal surfaces. Project surfaces are extremely slippery to walk on. DO NOT store in aluminum containers. COMBUSTIBLE: Keep away from heat, sparks open flames, or hot surfaces. DO NOT drink, or smoke when using this product. FIRST AID: IF INHALED: Move to an area with fresh air. In case of breathing difficulties administer oxygen and seek medical attention immediately. IF SWALLOWED: Rinse mouth with water, if person is conscious. DO NOT induce vomiting unless directed by medical personnel. Call Poison Control Center or doctor. IF ON SKIN: Rinse using water. Remove contaminated clothing. Wash skin thoroughly with mild soap and water. If skin irritation persists, seek medical attention. IF IN EYES: Flush eyes thoroughly with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention immediately. For additional information on this product, consult the EXPERT Clean & Bright product data sheet, or safety data sheet. REAL QUALITY. Limited Warranty. warranty TERMS: EXPERT Clean & Bright guarantees the contents of this container to Manufactured by: EXPERT Professional Wood Care,1483 N Mt. Juliet Rd., Suite # 135, Mt. Juliet, TN 37122 ©2022 Expert®™ Stain & Seal is a registered trademark of EXPERT®™ Professional Wood Care. All rights reserved. Application Method REAL APPLICATION. Easy-to-Use & Clean-Up. Read all application instructions prior to using EXPERT®™ Clean & Bright Stripper Booster. Always wear heavy-duty rubber gloves when working with EXPERT Clean & Bright Stripper Booster, or other EXPERT Clean & Bright products. Mix one part Stripper Booster with 3 parts Wood Stripper solution (already mixed). Use a pump sprayer or car wash brush to apply wood stripper product. Lightly dampen (without over-saturating) surfaces to be stripped to avoid excessive grain-rise. Apply a generous, uniform coat of stripper product using a car wash brush or pump sprayer. On vertical surfaces, apply product from the bottom up to avoid streaking. Avoid application in direct sunlight. Allow time for EXPERT Clean & Bright Wood Stripper and Stripper Booster mix to dissolve coating for 10 to 30 minutes. Mist with water if drying occurs. Test readiness by scrubbing a small area. When finish begins to lift from wood surface, agitate if necessary, using a stiff bristled brush in the same direction of wood grain. Use a garden hose at highest pressure, or a pressure washer with 1500-2500 psi to clean surface. Using a pressure washer will reduce the need for scrubbing. Always clean or scrub in the direction of wood grain. If stubborn areas remain, repeat the application in those areas. To neutralize and brighten wood, use EXPERT Clean & Bright’s STEP 3 Wood Brightener immediately, while wood is still wet. Let Wood Brightener sit for 5 to 15 minutes. Any Stripper not neutralized, or thoroughly rinsed will cause poor stain adhesion. After EXPERT’s Wood Brightener is applied, rinse all wood surfaces for 20 to 30 minutes. IMPORTANT: Make sure all soap suds are full rinsed off to avoid any reaction during the wood staining process. Allow wood surface to dry 2 to 4 hours (or longer) before applying EXPERT Stain & Seal wood stains. SDS Download our Safety Data Sheet EXPERT Professional Wood Care products do not and cannot guarantee to kill or eliminate organic growth, mold, mildew, algae, and other microorganisms from the use of our EXPERT 3-Step System. The EXPERT Professional Wood Care products have not been certified by the Environmental Protection Agency

Fan Deck Stain Palette

Wood Stain Color Samples- Fan Decks made of Western Red Cedar. These samples are hand made in our factory with real hand cut and hand stained boards, and highlight our 9 most popular colors. This gives you the most realistic stain sample possible. Be advised- no two boards are alike, expect some variance from board to board on colors. These samples give a great representation of color, however your own fence or deck may take stain differently than sample boards.

$40.00$79.99

●As low as $3/mo

Quick View

Wood Brightener: 100% Oxalic Acid

Our go-to Wood Brightener! We use this to neutralize wood surfaces after cleaning. A must for any wood restoration! PERFECT FOR: Fence Cleaning Deck Cleaning Cedar Siding Pergolas Tongue and Groove Any wood restoration BENEFITS & USES: Brings back the original color of the wood Neutralizes and brightens wood after any alkaline chemical wash Restores proper pH in wood and opens wood grain to accept more stain 100% Oxalic Acid Wood Brightener ADDITIONAL INSTRUCTIONS: Always wet plants, shrubs, and other vegetation before and after use. Test on a small, inconspicuous area of the wood to ensure proper wood care. Read and understand MSDS for this product prior to use. WARNING: Keep out of reach of children. Exposure to oxalic acid could cause irritation to the eyes, skin, or lungs. If contact occurs, rinse immediately with water for 15 minutes. If irritation continues, seek immediate medical attention. Do not ingest. Always wear personal protective equipment when using this product. DO NOT MIX WITH OTHER CHEMICALS. Coverage Rates Coverage: Add 4oz to 8oz of EXPERT’s Brightener added to one (1) gallon of water, each gallon covers 100 to 200 sq. ft. of surface area. Application Method REAL PERFORMANCE. Use & Preparation. EXPERT’s Wood Brightener is STEP 2 of our 3-STEP system. Intended for use on all types of weathered wood, including decks, fences, siding, log homes, patio furniture and other exterior wood. EXPERT’s Wood Brightener is ideal for surface prep prior to stain application. Product can be used solely as a cleaner and brightener, or as a neutralizer to further brighten woods that have been previously cleaned or stripped. TEST AREA: It’s recommended to test this product in a small, inconspicuous area to ensure desired results before use. Raised grain can occur as wood pores are opened during the cleaning process. LIMITATIONS: EXPERT Clean & Bright Wood Brightener cannot remove intact paint, stain, or clear finishes, and may dull painted or metal surfaces if not rinsed immediately. Always store in a temperature-controlled room, kept from freezing, and can be stored for up to 36 months, unopened. REAL APPLICATION. Easy-to-Use & Clean-Up. Read through all the step-by-step instructions prior to using EXPERT®™ Clean & Bright Wood Brightener. MIXING: Always wear heavy-duty rubber gloves, niosh approved respirator and PPE when working with EXPERT Clean & Bright Wood Brightener, or any other EXPERT Clean & Bright products. Mix 4oz to 8oz of Wood Brightener with each gallon of warm water and stir thoroughly until powder is mostly dissolved. Mix in a separate 5-gallon pail before transferring into a pump sprayer. This avoids clogging the sprayer. Use Brightener solution within 24 hours of mixing. Wood Brightener mixed solution is colorless for ease of identification. APPLICATION: Thoroughly wet the treatment surface, and all surrounding areas, including plants and shrubs with water before application. Apply EXPERT Clean & Bright Wood Brightener solution using either the sprayer, or a brush, a car wash brush, or mop. Scrubbing is not needed after using EXPERT’s Cleaner or Stripper. Let the Brightener solution sit for 5 to 15 minutes, keeping it wet with additional solution until an obvious color change has occurred. If applying Brightener on vertical surfaces, begin at the bottom, working upwards. Repeat application, if needed. RINSE: Rinse surfaces and surrounding areas thoroughly for 20 to 30 minutes with water from a hose or pressure washer using lowest pressure. Rinse wood and surrounding surfaces thoroughly, never let solution dry on windows, siding, metal and other surfaces or residue may be visible. Allow wood surfaces to dry 48 to 72 hours (or longer) before applying EXPERT Stain & Seal wood stains. Stains must be applied when wood is dried to 13% moisture content or less. SDS Download our Safety Data Sheet EXPERT Professional Wood Care products do not and cannot guarantee to kill or eliminate organic growth, mold, mildew, algae, and other microorganisms from the use of our EXPERT 3-Step System. The EXPERT Professional Wood Care products have not been certified by the Environmental Protection Agency

$12.99 – $269.99

Pre-Stained Cedar Tongue & Groove Fence Planks ⅞" x 6" x 6' - Fence Trac System Compatible

You May Also Like

The Finish Collection

Wood Stripper Booster: "Butyl Boost" 100% Butyl Cellosolve

Fan Deck Stain Palette

Wood Brightener: 100% Oxalic Acid

Pre-Stained Cedar Tongue & Groove Fence Planks ⅞" x 6" x 6' - Fence Trac System Compatible

You May Also Like

The Finish Collection

Wood Stripper Booster: "Butyl Boost" 100% Butyl Cellosolve

Fan Deck Stain Palette

Wood Brightener: 100% Oxalic Acid